Minimal welding required on the front struts, the rest is 100% bolt-on!

I made a special page with all the questions and answers regarding my lifted 240 in the pictures.

This kit consists of:

∙ 3" spacer for the rear…

These trackwidth spacers are need for driftcars and lifted volvo's. When raising a 240 the wheels get a nasty positive camber angle causing the car to drive less optimal. And it looks stoopid. With this set you bring the wheels…

These extension tubes are machined from high-quality steel in the exact dimensions of the OEM front struts of a Volvo 240 (will also fit 740 and 940 struts!). The tubes have chamfered edges (45 degrees) for optimal weld…

Spacers made from black nylon to lift the rear axle of your Volvo. Older Volvo's often have a sagging but and with these blocks, you can level them out.

Including longer M12 bolts with locknuts to install them between the rear…

3D printed logo's "240XC" for lifted 240's

This pair of 2mm thick SJ235 steel are precisely engineered to be welded in your rear support arms. This makes the stock support arms stiffer and this improves the handling of the car. This effect is even bigger when using PU…

Full stainless steel flange for stock turbo's on Volvo 240, 740 and 940's. This set exists of a 10mm thick flange and a 50mm (2") long piece of pipe.

Also available with a trumpeted pipe to use in a 3" exhaust system!

This pair of 2mm thick SJ235 steel are precisely engineered to be welded on the underside of the front support arms. This makes the stock support arms a lot stiffer and this improves the handling of the car. This effect is even…

This pair of 2mm thick SJ235 steel are precisely engineered to be welded on the underside and top of the rear support arms. This makes the stock support arms a lot stiffer and this improves the handling of the car. This effect is…

These adjustable and strengthened rear axle support arms provide better handling and most of all: the ability to adjust the rear axle and get that perfect stance!

For use on:

∙ lowered Volvo's: the arms will be shorter than…

A must when you are rebuilding your rear axle. This replaces the flimsy and ugly plastic covers that came with the car.

Sold as a set of two for use on one axle.

For normal, lowered of lifted cars!

Warning! For offroad use only and use at your own risk! Make sure to check your local laws to see if it is legal to modify the suspension of your car in this way.

Picture 1: Lowered car (53 mm…