240 - 740 - 940
Machined front strut extension tubes
These extension tubes are machined from super strong S355 steel in the exact dimensions of the OEM front struts of a Volvo 240 (will also fit 740 and 940 struts!). The tubes have chamfered edges (45 degrees) for optimal weld penetration and a small straight edge to help with alignment before welding to the existing struts.
By default, these tubes are 75mm (about 3") long, but they can be made in every desired length. Enter a custom length before adding this product to your cart. If no length is entered I'll make them 3" long.
Optionally orderable with spacers for the shock absorbers as shown in the second picture. These spacers are shaped to fit the original struts and shocks perfectly so the forces on the shocks are distributed evenly.
Mind you: make sure to weld in these tubes perfectly in line with the original struts or else the shock absorbers will not fit anymore!
The products are unpainted or treated in any way. Make sure to clean off any dirt, grease or rust before welding!
Warning! For offroad use only and use at your own risk! Make sure to check your local laws to see if it is legal to modify the suspension of your car in this way.